Dillon XL650 Accessories

I have got a question for all of you. I have seen all of the 3D printed add-ons for the XL650 and I was wondering which ones you thought were worth the money and which ones you would pass on? I saw Highboy with the primer stop addition and can see where that would really be useful. I just want to know which ones you use and what you might be looking for down the line?
 

AR Precision

Moderator
Staff member
I have got a question for all of you. I have seen all of the 3D printed add-ons for the XL650 and I was wondering which ones you thought were worth the money and which ones you would pass on? I saw Highboy with the primer stop addition and can see where that would really be useful. I just want to know which ones you use and what you might be looking for down the line?
Good ? The. 3d primer drop stuff works good I hear. The 3d blue pin flags break. Inline Fab has some flags that are good I hear. Dan has good products and has treated me very well even when I messed up something! lol
I have the primer stop like highboy, same one I'm sure. I have the upgrade ball and spring for shellplate. I have the long rod with a roller bearing and all this stuff works good so far for me.
Check out snowshoose on ebay and ebay will give a $5.00 off coupon sometime. I spelled snowshoose wrong but you will find his stuff with search. The only thing I don't use at all is the copper washer for shellplate. It works better for me to put a little grease around the bolt head on the shellplate. It turns like it's on ice for me like this. Also I adjust to right where there is no shell plate play at all. Some
leave a little play but I have found on my 650 I take it all out.
Hope this info helps!
 
Top Bottom